Safety is our top priority, from the design to production it guides our innovation and engineering. We understand the daily challenges you face, which is why our T-Series single-engine snow blowers are equipped with standard safety features such as joystick safety controls, guardrails, high-resistance tinted and curved windshield, a soundproofed cab (<80 dBA), and bumper to bumper peace-of-mind.
Operators working long shifts require clear lines-of-sight from within the cab. Driver focus helps reduce the chance of error, and that’s where our proprietary high-visibility Opti-cab™ design comes in. It delivers a superior 360° perspective for safer, more precise operation. An off-centered spot casting chute also helps reduce operator fatigue by providing better visibility. It’s safety that works for everyone.
Engineered for performance and built to last, Larue’s single-engine lineup is equipped with 456 to 755 horsepower turbo-diesel engines. Our units deliver casting distances up to 150 feet, all this while working at high speed. They’ve got power & capacity to spare.
All Larue self-propelled snow blowers are mounted on a specifically designed rugged steel chassis, to perform relentlessly under extreme operating conditions. Plus, the parts we make, or install have been rigorously tested and solidly built for maximum durability. Heavy-wear parts are machined from abrasion-resistant Hardox®, while still others are engineered from tungsten or chromium carbide, up to 4 times more durable. Larue snow blowers will not let you down.
Our cabin was designed with the operator in mind. Its advanced ergonomics means the job always gets done painlessly. Optimized for comfort & safety, it includes; ultra-user-friendly multifunctional joystick to control transmission gear as well as RPM and blower head functions, ergonomic keypad to control cab comfort features, LCD screen, power steering, tilt/telescoping steering wheel, soundproofed cab below 80 dBA, pneumatic driver seat, passenger seat, air conditioning/heater, heated mirrors, side window wipers, foot pedal switch for wipers, 12V electrical system and cup holders. These features make an operator’s work easier. Larue is behind some of the most important technology advancements in our segment. Change is good, and we’re leading the way.
Our products are engineered to last and generate maximum uptime. Efficiency, operating cost, ease-of-maintenance, quick access through catwalks, commonality of parts between models; these are just a few of the considerations that go into the design of each of our units. Plus, our system driveline is protected by safety/shear bolts, preventing damages to key components.
All of our snow blowers are Tier 4 Final and/or Stage V compliant, the strictest emission standards currently in effect. No compromise has been made when it comes to environmental stewardship. And fuel efficiency comes standard on all Larue equipment, so you save, and the planet benefits.
![]() |
![]() |
![]() |
|
---|---|---|---|
CARRIER VEHICLE SPECS CARRIER VEHICLE SPECS | T60 T60 | T70 T70 | T80 T80 |
PERFORMANCE CLASS PERFORMANCE CLASS | 3,500 TONS/H 3,500 TONS/H | 3,000 / 5,000 TONS/H 3,000 / 5,000 TONS/H | 5,000 TONS/H 5,000 TONS/H |
CASTING DISTANCE1 CASTING DISTANCE1 | 150 FT 46 M | 130 FT 40 M | |
CARRIER ENGINE CARRIER ENGINE | CATERPILLAR® C9.3B CATERPILLAR® C9.3B | CUMMINS® X15 CUMMINS® X15 | CATERPILLAR® C18 CATERPILLAR® C18 |
EMISSION STANDARD EMISSION STANDARD | STAGE V / TIER 4 FINAL STAGE V / TIER 4 FINAL | STAGE IV / TIER 4 FINAL STAGE IV / TIER 4 FINAL | |
ENGINE POWER ENGINE POWER | 456 HP 340 KW | 550 / 580 HP 410 / 433 KW | 755 HP 563 KW |
ENGINE TORQUE ENGINE TORQUE | 1,404 LB-FT 1,903 N-M | 1,850 / 1,950 LB-FT 2,509 / 2,644 N-M | 2,582 LB-FT 3,500 N-M |
FUEL TANK CAPACITY FUEL TANK CAPACITY | 160 US GAL 606 L | 250 US GAL 946 L | 300 US GAL 1,136 L |
TRANSMISSION TRANSMISSION | HYDROSTATIC HYDROSTATIC | ||
TRAVEL SPEED2 TRAVEL SPEED2 | 25-42 MPH 40-67 KM/H | ||
WORKING SPEED WORKING SPEED | 12.5 MPH 20 KM/H | ||
WHEELBASE WHEELBASE | 120 IN 3,048 MM | 130 IN 3,302 MM | |
VEHICLE LENGTH VEHICLE LENGTH | 245 IN 6,223 MM | 265 IN 6,731 MM | 280 IN 7,112 MM |
VEHICLE HEIGHT VEHICLE HEIGHT | 140 IN 3,556 MM | 142 IN 3,607 MM | 144 IN 3,658 MM |
VEHICLE WEIGHT3 VEHICLE WEIGHT3 | 23,314 LB 10,575 KG | 30,865 LB 14,000 KG | 32,900 LB 14,925 KG |
GROSS VEHICLE WEIGHT GROSS VEHICLE WEIGHT | 50,000 LB 22,680 KG | 57,000 LB 25,855 KG | |
COMPATIBLE BLOWER HEADS COMPATIBLE BLOWER HEADS | BH226 / R36 / R40 BH226 / R36 / R40 | 226 / R44 /R52 226 / R44 /R52 | R52M / R60M R52M / R60M |
1 Maximum casting distance is achieved when using the drum.
2 Vehicle travel speed to be limited according to local regulations.
3 Vehicle weight is subject to change depending on fluid levels, selected equipment and options.
Transportation dimensions are subject to change depending on selected equipment and options.
1 Maximum casting distance is achieved when using the drum.
2 Vehicle travel speed to be limited according to local regulations.
3 Vehicle weight is subject to change depending on fluid levels, selected equipment and options.
Transportation dimensions are subject to change depending on selected equipment and options.
![]() |
![]() |
![]() |
|
---|---|---|---|
COMPARE BLOWER HEADS COMPARE BLOWER HEADS | BH226 BH226 | R36 R36 | R40 R40 |
PERFORMANCE CLASS PERFORMANCE CLASS | 3,000 TONS/H 3,000 TONS/H | 2,900 TONS/H 2,900 TONS/H | 3,000 TONS/H 3,000 TONS/H |
CASTING DISTANCE CASTING DISTANCE | 150 FT 46 M | ||
DRIVE SYSTEM DRIVE SYSTEM | MECHANICAL MECHANICAL | ||
WORKING WIDTH WORKING WIDTH | 114 IN 2,896 MM | ||
WORKING HEIGHT WORKING HEIGHT | 58 IN 1,473 MM | 52 IN 1,321 MM | |
LENGTH LENGTH | 65 IN 1,651 MM | 75 IN 1,905 MM | 79 IN 2,007 MM |
WEIGHT WEIGHT | 5,291 LB 2,400 KG | 5,071 LB 2,300 KG | 5,512 LB 2,500 KG |
CONVEYOR CONVEYOR | DUAL AUGER DUAL AUGER | RIBBON RIBBON | |
RIBBON / AUGER DIAMETER RIBBON / AUGER DIAMETER | 2 X 26 IN 2 X 660 MM | 36 IN 914 MM | 40 IN 1,016 MM |
IMPELLER DIAMETER IMPELLER DIAMETER | 42 IN 1,067 MM |
![]() |
![]() |
![]() |
|
---|---|---|---|
COMPARE BLOWER HEADS COMPARE BLOWER HEADS | 226 226 | R44 R44 | R52 R52 |
PERFORMANCE CLASS PERFORMANCE CLASS | 3,800 TONS/H 3,800 TONS/H | 3,600 / 5,000 TONS/H 3,600 / 5,000 TONS/H | |
CASTING DISTANCE CASTING DISTANCE | 150 FT 46 M | ||
DRIVE SYSTEM DRIVE SYSTEM | MECHANICAL MECHANICAL | ||
WORKING WIDTH WORKING WIDTH | 114 IN 2,896 MM | ||
WORKING HEIGHT WORKING HEIGHT | 58 IN 1,473 MM | 60 IN 1,524 MM | |
LENGTH LENGTH | 91 IN 2,311 MM | 109 IN 2,769 MM | 117 IN 2,972 MM |
WEIGHT WEIGHT | 6,393 LB 2,900 KG | 6,614 LB 3,000 KG | 7,275 LB 3,300 KG |
CONVEYOR CONVEYOR | DUAL AUGER DUAL AUGER | RIBBON RIBBON | |
RIBBON / AUGER DIAMETER RIBBON / AUGER DIAMETER | 2 X 26 IN 2 X 660 MM | 44 IN 1,118 MM | 52 IN 1,321 MM |
IMPELLER DIAMETER IMPELLER DIAMETER | 52 IN 1,321 MM |
![]() |
![]() |
|
---|---|---|
COMPARE BLOWER HEADS COMPARE BLOWER HEADS | R52M R52M | R60M R60M |
PERFORMANCE CLASS PERFORMANCE CLASS | 5,000 TONS/H 5,000 TONS/H | |
CASTING DISTANCE CASTING DISTANCE | 130 FT 40 M | |
DRIVE SYSTEM DRIVE SYSTEM | MECHANICAL MECHANICAL | |
WORKING WIDTH WORKING WIDTH | 112 IN 2,845 MM | 117 IN 2,972 MM |
WORKING HEIGHT WORKING HEIGHT | 60 IN 1,524 MM | 72 IN 1,829 MM |
LENGTH LENGTH | 115 IN 2,921 MM | 123 IN 3,124 MM |
WEIGHT WEIGHT | 12,566 LB 5,700 KG | 13,448 LB 6,100 KG |
CONVEYOR CONVEYOR | RIBBON RIBBON | |
RIBBON / AUGER DIAMETER RIBBON / AUGER DIAMETER | 52 IN 1,321 MM | 60 IN 1,524 MM |
IMPELLER DIAMETER IMPELLER DIAMETER | 60 IN 1,524 MM |
Question?
Price quote?
Expert advice?
We’re here to help!